Aluninium frame 90W PV Solar Panels solar cell charging for solar tracking device and Mobile speaker battery
Features:
ENHANCED EXTERNAL LOAD / IMPACT
Snow Load : 5,400 Pa (30T) / 8,400 Pa (40T)
Wind Load : 2,400 Pa (30T) / 5,400 Pa (40T)
Hail Impact : 30.7m/s (speed ball)
POWER ADVANTAGE
25-year, linear power warranty
> 97.5% nominal power during 1st year
Positive tolerance up to +5W
PID RESISTANCE
Enhanced potential induced degradation
FIRE SAFETY
UL1703 Fire Classification : Type 1, Type 2
ENVIRONMENT RESISTANCE
Suitable for extreme conditions
Resistant to high salt mist and ammonia
AVAILABLE IN TWO THICKNESSES
Standard (30T) and 40T for more durability
Electrical Characteristics
| ITEM NO | 90W/18V |
| MONO or POLY | poly |
| Maximum power (Wp) | 90wp |
| Maximum power voltage (V) | 18 |
| Maximum power current (A) | 5 |
| Open circuit voltage (V) | 21.6 |
| Short circuit current (A) | 5.4 |
| Number of cells (Pcs) | 36 |
| Size of module (mm) | 1195*540*30 |
| Brand Name of Solar Cells | HT |
| Maximum system voltage (V) | 715 |
| Temperature coefficients of Isc (%) | 0.065+/-0.015%/°C |
| Temperature coefficients of Voc (%) | -(2.23+/-0.1)mv/ °C |
| Temperature coefficients of Pm (%) | -(0.5+-0.05)/ °C |
| Temperature coefficients of Im (%) | +0.1/ °C |
| Temperature coefficients of Vm (%) | -0.38/ °C |
| Temperature Range | -40°C~+85°C |
| Tolerance Wattage (e.g. +/-5%) | +/-5% |
| Surface Maximum Load Capacity | 60m/s(200kg/sq.m) |
| Allowable Hail Load | steel ball fall down from 1m height |
| Weight per piece (kg) | 5 |
| Length of Cables (mm) | 0m |
| Cell Efficiency (%) | more than13% |
| Module Efficiency (%) | more than 8% |
| Output tolerance (%) | +/-5% |
| Frame (Material, Corners, etc.) | Aluminum |
| Standard Test Conditions | AM1.5 100mw/cm2 25°C |
| Warranty | 2 years product warranty and 25years 80% of power |
| FF (%) | 75% |
| Packing | 2PCS/ CTN |
| Unit Price |
Roof-mounted solar power systems
Roof-mounted solar power systems consist of solar modules held in place by racks or frames attached to
roof-based mounting supports. Roof-based mounting supports include:
Pole mounts, which are attached directly to the roof structure and may use additional rails for attaching the
module racking or frames.
Ballasted footing mounts, such as concrete or steel bases that use weight to secure the panel system in
position and do not require through penetration. This mounting method allows for decommissioning or
relocation of solar panel systems with no adverse effect on the roof structure.
All wiring connecting adjacent solar modules to the energy harvesting equipment must be installed according
to local electrical codes and should be run in a conduit appropriate for the climate conditions
FAQ
Q1: Are you a factory or trading company?
A Yes, we are factory, supplying OEM/ODM service.
Q2:Where is your factory located? How can I visit there?
A: Our factory is located in yuyao ,Zhejiang province China, near shanghai, You are warmly welcomed to
visit us!
Q3: How about the delivery time?
A3: 7 days for sample; 25 days for bulk order.
Q4:Can the price be cheaper?
A: Of course, you will be offered a good discount for big amount.
Q5: Could you print our company LOGO on the nameplate and package?
A: Yes, we accept OEM orders.
